Spraybooth compliance in Queensland

Spraybooth compliance in Queensland, the installation and auditing of spray booths are subject to specific compliance requirements to ensure safety and environmental protection. These requirements are generally similar across Australian states, but there are some differences in regulations and enforcement.

Queensland Requirements for Spraybooth Installation

Spray booths in Queensland must be designed, constructed, and installed in accordance with AS/NZS 4114.1:2020 – Spray painting booths, designated spray painting areas and paint mixing rooms [1]. The key requirements include:

  • Proper ventilation systems with filtration to remove airborne residue
  • Exhaust capture systems to prevent exposure to hazardous substances
  • Minimum air flow rates:
    • 0.3 m/s for full down draught booths
    • 0.4 m/s for electrostatic spray painting booths
    • 0.5 m/s for any other type of booth

Comparison with Other States

New South Wales

NSW has similar requirements to Queensland, following the AS/NZS 4114.1 standard. However, NSW places additional emphasis on:

  • Local council requirements for permits and documentation
  • Specific guidelines for powder coating systems [22][28]

Spraybooth Auditing and Compliance

Spraybooth compliance in Queensland businesses must:

  • Conduct regular maintenance and inspections of spray booths
  • Ensure proper training of operators
  • Implement safety measures including personal protective equipment (PPE)
  • Comply with the Spray Painting and Powder Coating Code of Practice 2021 [11]

Hazardous area installations, including spray booths, must be inspected by an accredited auditor prior to connection or reconnection to a power source [32].

Victoria

Victoria’s regulations are largely aligned with spraybooth compliance in Queensland, but with some distinctions:

  • Spray booths using flammable liquids are considered prescribed works and require sign-off by an H-Class Inspector [23]
  • Greater emphasis on EPA guidelines and local environmental regulations [28]

South Australia

South Australia follows similar standards but has additional focus on:

  • Ministers Specification SA 76 for maintenance and testing of essential safety provisions [33]
  • Specific requirements for certificates of compliance (Form 2 and Form 3) [33]

Western Australia

Western Australia’s requirements include:

  • Compliance with the Environmental Protection (Metal Coating) Regulations 2001
  • Specific conditions for air extraction units and filtration systems [34]

Tasmania

Tasmania’s regulations are similar to Queensland’s but with some unique aspects:

  • Emphasis on compliance with the Gas Safety Act 2019 and Gas Safety Regulations 2021 [19]
  • Specific requirements for design, construction, installation, maintenance, and testing as per AS 4114 [19]

Key Differences

  1. Inspection Authority: Spraybooth compliance in Queensland requires accredited auditors for hazardous area installations, while Victoria specifies H-Class Inspectors for flammable liquid spray booths.
  2. Local Regulations: Each state has specific local council and EPA requirements that must be considered alongside national standards.
  3. Documentation: South Australia has more detailed requirements for compliance certificates compared to other states.
  4. Environmental Focus: Western Australia and Victoria place greater emphasis on environmental protection regulations in their spray booth requirements.
  5. Gas Safety: Tasmania specifically mentions gas safety regulations in relation to spray booth compliance.

In conclusion, while the core requirements for spray booth installation and auditing are similar across Australia, businesses must be aware of state-specific regulations and local council requirements. Regular audits, maintenance, and operator training are universally important for compliance and safety across all states.

Need help?  Contact us today

Citations and reference information:

[1] https://macquarieairfiltration.com.au/australian-spray-booth-regulations-a-comprehensive-guide/

[2] https://www.epw.qld.gov.au/__data/assets/pdf_file/0018/4329/mp5.8-workplaces-involving-spray-painting20previously20part202.pdf

[3] https://www.worksafe.vic.gov.au/spraying-flammable-liquids [5] https://worksafe.tas.gov.au/topics/laws-and-compliance/codes-of-practice/cop-folder/spray-painting-and-powder-coating

[6] https://worksafe.nt.gov.au/__data/assets/pdf_file/0011/798194/Spray-painting-and-powder-coating.pdf

[7] https://public-library.safetyculture.io/products/rockhampton-spray-paint-booth-12-month-audit-duplicate

[8] https://www.brisbane.qld.gov.au/laws-and-permits/complaints-and-fines/noise-air-light-and-water-complaints/air-and-odour-complaints/spray-paint-and-chemical-spraying-complaints

[9] https://www.worksafe.qld.gov.au/__data/assets/pdf_file/0024/72645/spray-painting-powder-coating-cop-2021.pdf

[11] https://www.worksafe.qld.gov.au/safety-and-prevention/hazards/hazardous-exposures/spray-painting

[14] https://ablis.business.gov.au/service/qld/spray-painting-and-powder-coating-code-of-practice-2021/42273

[17] https://www.safeworkaustralia.gov.au/sites/default/files/2020-07/model_code_of_practice_spray_painting_and_powder_coating.pdf

[18] https://safework.sa.gov.au/_data/assets/pdf_file/0009/136278/Code-of-Practice-Spray-painting-and-powder-coating.pdf

[19] https://ablis.business.gov.au/service/tas/as-4114-spray-paint-booths/46282

[20] https://ablis.business.gov.au/service/nt/spray-painting-and-powder-coating-code-of-practice/46262

[21] https://legislation.act.gov.au/DownloadFile/ni/2022-685/current/PDF/2022-685.PDF

[22] https://www.safework.nsw.gov.au/__data/assets/pdf_file/0004/52159/Code-of-practice_Spray-painting-and-powder-coating_2022.pdf

[23] https://lithiumoilandgas.com/is-a-flammable-liquids-spray-booth-installed-in-victoria-considered-to-be-prescribed-works-and-does-it-need-an-h-class-inspector/

[24] https://www.epa.sa.gov.au/files/8332_ems_motor_industry.pdf

[25] https://worksafe.tas.gov.au/__data/assets/pdf_file/0008/537128/Code-of-Practice-Spray-painting-and-powder-coating.pdf

[28] https://www.epa.nsw.gov.au/licensing-and-regulation/authorised-officers-and-enforcement-officers/safety-inspecting-spray-painting-prems/spray-painting-and-surface-coating

[29] https://www.legislation.tas.gov.au/view/whole/pdf/authorised/2022-07-01%202022-07-08/sr-2016-110

[30] https://www.safeworkaustralia.gov.au/system/files/documents/1705/mcop-spray-painting-and-powder-coating-v3.pdf

[31] https://protectfitzroynorth.org/resources/nsw-spraypaint07268.pdf

[32] https://www.worksafe.qld.gov.au/laws-and-compliance/compliance-and-enforcement/audits-and-inspections/electrical-safety-audits/hazardous-area-installations-audits

[33] https://www.sa.gov.au/__data/assets/pdf_file/0009/524646/Ministers-Specification-SA-76-Maintenance-and-testing-of-essential-safety-provisions-Amendment-1-1-May-2019.pdf

[34] https://www.der.wa.gov.au/our-work/licences-and-works-approvals/lwa-available-for-public-appeal/item/download/6816_e1913b91791c3f28da0ccc13536ed86b

[35] https://policies.anu.edu.au/ppl/document/ANUP_000577